Cisco 8811 Administration Guide

Firmware ReleaseSupportedFeature
11.5(1) and laterYesPrivacy
11.5(1) and laterYesQueue Status
11.5(1) and laterYesQuality Reporting Tool (QRT)
-NoRight to Left locale support
11.5(1) and laterYesRedial
11.5(1)SR1 and laterYesSilent Monitoring and Recording
11.5(1) and laterYesSpeed Dial
11.5(1) and laterYesSurvivable Remote Site Telephony
(SRST)
11.5(1) and laterYesTransfer
11.5(1) and laterYesUniform Resource Identifier (URI)
Dialing
11.5(1) and laterYesVideo Calls
11.5(1) and laterYesVisual Voicemail
11.5(1) and laterYesVoicemail
Related Topics
Enhanced Line Mode and Session Line Mode Environments, on page 155
Enable Intelligent Proximity
This procedure only applies to Bluetooth enabled phones. Cisco IP Phone 8811, 8841, 8851NR, and
8865NR do not support Bluetooth.
Note
Intelligent Proximity enables users to take advantage of the acoustic properties of the phone with their mobile
device or tablet. The user pairs the mobile device or tablet to the phone using Bluetooth.
With a mobile device paired, the user can place and receive mobile calls on the phone. With a tablet, the user
can route the audio from the tablet to the phone.
Users can pair multiple mobile devices, tablets, and a Bluetooth headset to the phone. However, only one
device and one headset can be connected at the same time.
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
192
Enable Intelligent Proximity

Cisco 8811 Specifications

General

Ethernet Ports	2 x 10/100/1000
Lines Supported	5
Speakerphone	Yes
Headset Port	Yes
USB Port	No
Bluetooth	No
Wi-Fi	No
Resolution	800 x 480 pixels
PoE	Yes, IEEE 802.3af Class 2
Audio Codec Support	G.711, G.722, G.729, iLBC
Protocols	SIP
Display	5-inch, 800 x 480 pixels
Headset Jack	RJ9
Weight	1.1 kg