EasyManuals Logo

Cisco 8811 Administration Guide

Cisco 8811
280 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #199 background imageLoading...
Page #199 background image
Procedure
Step 1
In Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2
Select the device associated to the user you are searching for.
Step 3
In the Related Links drop-down, choose Subscribe/Unsubscribe Services and click Go.
Step 4
Select the VisualVoiceMail Service you created, then choose Next > Subscribe.
Visual Voicemail Setup for a User Group
To add a batch of Cisco IP phones to Cisco Unified Communications Manager with Visual Voicemail
subscribed, create a phone template in BAT tool for each phone type and in each phone template. You can
then subscribe to the Visual Voicemail service, and use the template to insert the phones.
For more information, see http://www.cisco.com/c/en/us/support/unified-communications/visual-voicemail/
model.html.
Set up AS-SIP
Depending on how you have configured your phone system, you may be able to make priority calls using the
Assured Services for SIP Lines (AS-SIP) feature.
With this feature, routine calls are placed normally. However, during an emergency, you can select a priority
level that helps ensure the delivery of critical calls. Depending upon how your phone is configured, you may
have to sign-in also.
When you receives a priority call, a precedence level icon displays next to the callers name on your phone.
Procedure
Step 1
In Cisco Unified Communications Manager Administration, choose Device > Device Settings > SIP Profile.
Step 2
Select a profile.
Step 3
Set the Is Assured SIP Service Enabled check box.
This setting provides specific Assured Service behavior that affects services such as Conference factory and
SRTP.
Step 4
Enable MLPP Authorization for a device by checking the MLPP User Authorization check box.
When the MLPP User Authorization check box is enabled, the system challenges the AS-SIP phone for the
users credentials when a precedence call is made.
Step 5
Set the Resource Priority namespace.
An AS-SIP phone is associated with a single Resource Priority namespace.
If <None> is left as the namespace in the SIP profile, then the default namespace is used.
All devices using this profile must be restarted.
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
181
Phone Feature Configuration

Table of Contents

Other manuals for Cisco 8811

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 8811 and is the answer not in the manual?

Cisco 8811 Specifications

General IconGeneral
Ethernet Ports2 x 10/100/1000
Lines Supported5
SpeakerphoneYes
Headset PortYes
USB PortNo
BluetoothNo
Wi-FiNo
Resolution800 x 480 pixels
PoEYes, IEEE 802.3af Class 2
Audio Codec SupportG.711, G.722, G.729, iLBC
ProtocolsSIP
Display5-inch, 800 x 480 pixels
Headset JackRJ9
Weight1.1 kg

Related product manuals