Related Topics
Apply a Phone Password, on page 42
Perform Network Configuration Reset
Resets network configuration settings to their default values and resets the phone. This method causes DHCP
to reconfigure the IP address of the phone.
Procedure
Step 1
From the Administrator Settings menu, if required, unlock phone options.
Step 2
Choose Reset Settings > Network Setup.
Related Topics
Apply a Phone Password, on page 42
Perform User Network Configuration Reset
Resets any user and network configuration changes that you have made, but that the phone has not written to
flash memory, to previously saved settings.
Procedure
Step 1
From the Administrator Settings menu, if required, unlock phone options.
Step 2
Choose Reset Settings > Reset Device.
Related Topics
Apply a Phone Password, on page 42
Remove CTL File
Deletes only the CTL file from the phone.
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
257
Perform Network Configuration Reset
To Next Page
Loading...
Need help?
General
