Procedure
Step 1
Obtain the IP address of the Cisco IP Phone by using one of these methods:
a) Search for the phone in Cisco Unified Communications Manager Administration by choosing Device >
Phone. Phones that register with Cisco Unified Communications Manager display the IP address on the
Find and List Phones window and at the top of the Phone Configuration window.
b)
On the Cisco IP Phone, press Applications , choose Admin settings > Network setup > Ethernet
setup > IPv4 setup, and then scroll to the IP Address field.
Step 2
Open a web browser and enter the following URL, where IP_address is the IP address of the Cisco IP Phone:
http://IP_address
Device Information
The Device information area on a phone web page displays device settings and related information for the
phone. The following table describes these items.
Some of the items in the following table do not apply to all phone models.Note
To display the Device information area, access the web page for the phone as described in Access Web Page
for Phone, on page 217, and then click the Device information hyperlink.
Table 40: Device Information Area Items
DescriptionItem
The service mode for the phone.Service mode
The domain for the service.Service name
The current state of the service.Service state
Media Access Control (MAC) address of the phone.MAC Address
Unique, fixed name that is automatically assigned to the phone based on the
MAC address.
Host name
Directory number that is assigned to the phone.Phone DN
Application firmware version that is running on the phone.App load ID
Boot firmware version.Boot load ID
Identifier of the firmware that is running on the phone.Version
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
218
Cisco IP Phone Web Page
To Next Page
Loading...
Need help?
General
