Cisco 8811 Administration Guide

USB port9AC power wall plug (optional).3
Audio In/Out ports10Network port (10/100/1000 SW) connection.
IEEE 802.3at power enabled.
4
USB port11Access port (10/100/1000 PC) connection.5
Auxiliary port.6
Each USB port supports the connection of up to five supported and nonsupported devices. Each device
connected to the phone is included in the maximum device count. For example, your phone can support
five USB devices (such as three key expansion modules, one hub, and one other standard USB device)
on the side port and five additional standard USB devices on the back port. Many third-party USB products
count as multiple USB devices, for example, a device containing USB hub and headset can count as two
USB devices. For more information, see the USB device documentation.
Note
Buttons and Hardware
The Cisco IP Phone 8800 Series has two distinct hardware types:
• Cisco IP Phones 8811, 8841, 8851, 8851NR, and 8861—do not have a camera.
• Cisco IP Phones 8845, 8865, and 8865NR—have a built-in camera.
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
30
Buttons and Hardware

Cisco 8811 Specifications

General

Ethernet Ports	2 x 10/100/1000
Lines Supported	5
Speakerphone	Yes
Headset Port	Yes
USB Port	No
Bluetooth	No
Wi-Fi	No
Resolution	800 x 480 pixels
PoE	Yes, IEEE 802.3af Class 2
Audio Codec Support	G.711, G.722, G.729, iLBC
Protocols	SIP
Display	5-inch, 800 x 480 pixels
Headset Jack	RJ9
Weight	1.1 kg