Procedure
Step 1
In Cisco Unified Communications Manager Administration, select Device > Device Settings > SIP Profile
Step 2
Set the Start Media Port and Stop Media Port fields for the audio port range.
Step 3
Select Save.
Step 4
Select one of the following windows:
•
System > Enterprise Phone Configuration
•
Device > Device Settings > Common Phone Profile
•
Device > Phone > Phone Configuration
Step 5
Set the Start Video RTP Port and Stop Video RTP Port fields for the range of ports required.
The following rules apply when configuring the video port fields:
•
The value in the Stop Video RTP Port field must be larger than the value in the Start Video RTP Port
field.
•
The difference between the Start Video RTP Port field and the Stop Video RTP Port field must be at
least 16.
Step 6
Select Save.
Related Topics
Cisco Unified Communications Manager Documentation, on page xvii
Set up Cisco IP Manager Assistant
Cisco IP Manager Assistant (IPMA) provides call routing and other call management features to help managers
and assistants handle phone calls more effectively.
IPMA services must be configured in Cisco Unified Communications Manager before you can access them.
For detailed information on configuring IPMA, see the Feature Configuration Guide for Cisco Unified
Communications Manager.
IPMA has three key components:
Manager
A manager has calls intercepted by the call routing service.
Assistant
An assistant handles calls on behalf of a manager.
Assistant Console
The assistant console is a desktop application assistants can use to perform tasks and manage most
features.
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
177
Phone Feature Configuration
To Next Page
Loading...
Need help?
General
