Cisco 8811 Administration Guide

DescriptionItem
Rate at which the receiver is receiving frames.Rcvr frame rate
Number of frames that were not received.Rcvr frames lost
Number of frames that were not received.Rcvr frame errors
Bandwidth of the receiver.Rcvr bandwidth
Video resolution of the receiver.Rcvr resolution
Domain that the phone resides in.Domain
Number of times the sender joined.Sender joins
Number of times the receiver joinedRcvr joins
Number of “Bye” frames
Byes
Time that the sender started.Sender start time
Time that the receiver started.Rcvr start time
Whether the phone is streamingRow status
Type of audio encoding used for the streamSender tool
RTCP Sender ReportsSender reports
Last time at which an RTCP Sender Report was sent.Sender report time
Maximum jitter of streamRcvr Jitter
Type of audio encoding used for the streamReceiver tool
Number of times this streaming statistics report has been accessed from the web
page.
Rcvr reports
Internal time stamp indicating when this streaming statistics report was generatedRcvr report time
Indicates if the call was a video call or audio only.Is video
Identification of the callCall ID
Identification of the group that the phone is in.Group ID
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
233
Cisco IP Phone Web Page

Cisco 8811 Specifications

General

Ethernet Ports	2 x 10/100/1000
Lines Supported	5
Speakerphone	Yes
Headset Port	Yes
USB Port	No
Bluetooth	No
Wi-Fi	No
Resolution	800 x 480 pixels
PoE	Yes, IEEE 802.3af Class 2
Audio Codec Support	G.711, G.722, G.729, iLBC
Protocols	SIP
Display	5-inch, 800 x 480 pixels
Headset Jack	RJ9
Weight	1.1 kg