Cisco 8811

NotesSupportedFeature
Conference is the only feature supported
due to other feature limitations.
YesUnified Session Presentation
Voicemail will not be synchronized with
other users in the Cisco Unified
Communications Manager cluster.
YesVoicemail
Forward state is only available on the phone
that sets the forward because there are no
shared line appearances in SRST mode. The
Call Forward All settings are not preserved
on failover to SRST from the Cisco Unified
Communications Manager, or from SRST
fail-back to the Communications Manager.
Any original Call Forward All still active
on the Communications Manager should
be indicated when the device reconnects to
the Communications Manager after failover.
YesCall Forward All
YesSpeed Dial
YesService IRL Programmable Line
Key
The iDivert softkey does not display.NoTo Voicemail (iDivert)
Lines are supported but cannot be shared.PartialLine Filters
The Park softkey does not display.NoPark Monitoring
The Barge softkey does not display.NoBarge
Message count badges do not appear on the
phone screen.
Only the Message Waiting icon displays.
NoEnhanced Message Waiting
Indication
The softkey does not display.NoDirected Call Park
BLF feature key works like Speed Dial
keys.
PartialBLF
Calls remain on hold indefinitely.NoHold Reversion
Calls appear as Local Hold calls.NoRemote Hold
The Meet Me softkey does not display.NoMeet Me
The softkey causes no action.NoPickUp
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
76
Survivable Remote Site Telephony