Cisco ASR 1000 Configuration Guide

7-31
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
Chapter 7 Configuring the ATM SPAs
Configuration Examples
protocol pppoe group bba_group1
create on-demand
idle-timeout 30
vbr-nrt 1000 1000 1
!
interface atm0/0/0
atm clock internal
no shutdown
!
interface atm0/0/0.65000 multipoint
range pvc 1/32 1/4031
protocol pppoe group bba_group1
pvc-in-range 1/32
class-vc pvcr_bba_vc_class
!
pvc-in-range 1/33
class-vc pvcr_bba_vc_class
!
pvc-in-range 1/34
class-vc pvcr_bba_vc_class
!
pvc-in-range 1/35
class-vc pvcr_bba_vc_class
!
pvc-in-range 1/36
class-vc pvcr_bba_vc_class
!
interface virtual-template 1
no snmp trap link-status
keepalive 60
ppp ipcp address required
ip unnumbered loopback1
peer default ip address pool local_pool1
ppp mtu adaptive
ppp authentication pap
no logging event link-status
SONET and SDH Framing Configuration Example
!
interface ATM0/2/2
description Example of SONET framing-“atm framing sonet” is default and doesn’t appear
ip address 10.16.2.2 255.255.255.0
logging event link-status
atm sonet report all
atm sonet threshold sd-ber 3
atm sonet threshold sf-ber 6
atm sonet overhead c2 0x00
!

Cisco ASR 1000 Specifications

General

Operating System	Cisco IOS XE
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC
Number of Total Expansion Slots	Varies by model
Management Port	Console
Redundant Power Supply Supported	Yes
Width	17.5 inches
Memory	Varies by model
Storage	Varies by model
Dimensions (H x W x D)	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model
Redundancy	Redundant power supplies, fans, and route processors (depending on model)