Cisco ASR 1000 Configuration Guide

3
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
Overview of the SIP
Supported MIBS
Cisco ASR1000-SIP10 High-Availability Features
• Online insertion and removal (OIR) of the SIP and SPAs
• Nonstop Forwarding (NSF)
• Stateful switchover (SSO)
• Frame Relay switching
• VC bundle Class of Service (CoS) precedence mapping
Supported MIBS
The following MIBs are supported in Cisco IOS XE Release 2.2 and later releases for the Cisco
ASR1000-SIP10 on a Cisco ASR 1000 Series Router:
• ENTITY-MIB (RFC 4133)
• CISCO-ENTITY-FRU-CONTROL-MIB
• CISCO-ENTITY-ALARM-MIB
• ENTITY-SENSOR-MIB (RFC 3433)
• CISCO-ENTITY-SENSOR-MIB
• CISCO-EXTENDED-EXT-MIB
The following MIBs are supported in Cisco IOS XE Release 3.1S and later for the Cisco
ASR1000-SIP40 on a Cisco ASR 1000 Series Router:
• ENTITY-MIB (RFC 4133)
• CISCO-ENTITY-FRU-CONTROL-MIB
• CISCO-ENTITY-ALARM-MIB
• ENTITY-SENSOR-MIB (RFC 3433)
• CISCO-ENTITY-SENSOR-MIB
• CISCO-EXTENDED-EXT-MIB
Command Reference Information
For command reference information, refer to the Cisco IOS command reference and master index
publications.

Cisco ASR 1000 Specifications

General

Operating System	Cisco IOS XE
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC
Number of Total Expansion Slots	Varies by model
Management Port	Console
Redundant Power Supply Supported	Yes
Width	17.5 inches
Memory	Varies by model
Storage	Varies by model
Dimensions (H x W x D)	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model
Redundancy	Redundant power supplies, fans, and route processors (depending on model)