Cisco ASR 1000 Configuration Guide

CHAPTER
14-1
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
14
Overview of the Serial SPAs
This chapter provides an overview of the release history, supported features, restrictions, and
Management Information Base (MIB) support for the serial SPAs on the Cisco ASR 1000 Series
Aggregation Services Routers.
This chapter includes the following sections:
• Release History, page 14-1
• Supported Features, page 14-2
• Restrictions, page 14-4
• Supported MIBs, page 14-5
• Displaying the SPA Hardware Type, page 14-7
Release History
Release Modification
Cisco IOS XE Release
2.6
Support for the following SPA was introduced on the Cisco
ASR
1000 Series SIP:
• 1-Port Channelized OC-12/STM-4 SPA
Cisco IOS XE Release
2.2
Support for the following SPA was introduced on the Cisco
ASR
1000 Series SIP:
• 1-Port Channelized OC-3/STM-1 SPA
Cisco IOS XE Release
2.1
Support for the following SPAs was introduced on the Cisco
ASR
1000 Series SIP:
• 2-Port Clear Channel T3/E3 SPA (SPA-2XT3/E3)
• 4-Port Clear Channel T3/E3 SPA (SPA-4XT3/E3)
• 8-Port Channelized T1/E1 SPA (SPA-8XCHT1/E1)
• 2-Port Channelized T3 SPA(SPA-2XCT3/DS0)
• 4-Port Channelized T3 SPA (SPA-4XCT3/DS0)
• 4-Port Serial SPA (SPA-4TX-Serial)

Cisco ASR 1000 Specifications

General

Operating System	Cisco IOS XE
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC
Number of Total Expansion Slots	Varies by model
Management Port	Console
Redundant Power Supply Supported	Yes
Width	17.5 inches
Memory	Varies by model
Storage	Varies by model
Dimensions (H x W x D)	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model
Redundancy	Redundant power supplies, fans, and route processors (depending on model)