Cisco ASR 1000 Configuration Guide

25-7
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
Chapter 25 Configuring the Cisco DSP SPA for the ASR 1000 Series
Additional References
Additional References
The following sections provide references related to the SPA-DSP and Voice Transcoding Support.
Related Documents
Standards
MIBs
RFCs
Related Topic Document Title
SBC configuration Cisco Unified Border Element (SP Edition) Configuration Guide:
Unified Model
SPA-DSP Hardware information Cisco ASR 1000 SIP and SPA Hardware Installation Guide
Standard Title
None —
MIB MIBs Link
Common MIBs
• ENTITY-MIB
• ENTITY-SENSOR-MIB
Cisco-Specific Common MIBs
• CISCO-DSP-MGMT-MIB
• OLD-CISCO-CHASSIS-MIB
• CISCO-ENTITY-FRU-CONTROL-MIB
• CISCO-ENTITY-SENSOR-MIB
• CISCO-ENTITY-ALARM-MIB
• CISCO-ENTITY-VENDORTYPE-OID-MIB
To locate and download MIBs for selected platforms, Cisco IOS
releases, and feature sets, use Cisco
MIB Locator found at the
following URL:
http://www.cisco.com/go/mibs
For more information about MIB support on a Cisco ASR 1000
Series Routers, refer to the
Cisco ASR 1000 Series Aggregation
Services Routers MIB Specifications Guide, at the following URL:
http://www.cisco.com/en/US/docs/routers/asr1000/mib/guide/asr1k
mib.html
RFC Title
None —

Cisco ASR 1000 Specifications

General

Operating System	Cisco IOS XE
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC
Number of Total Expansion Slots	Varies by model
Management Port	Console
Redundant Power Supply Supported	Yes
Width	17.5 inches
Memory	Varies by model
Storage	Varies by model
Dimensions (H x W x D)	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model
Redundancy	Redundant power supplies, fans, and route processors (depending on model)