6-7
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
Chapter 6 Overview of the ATM SPAs
Supported MIBs
• For ATM SPAs on the Cisco ASR1000 series routers, ISSU from releases prior to Cisco IOS XE
Release 2.5.0 to Cisco IOS XE Release 2.5.0, or from Cisco IOS XE Release 2.5.0 to a release prior
to Cisco IOS XE Release 2.5.0, is not supported. If you want to perform ISSU in this environment,
you must first remove the configuration from the ATM SPAs on the router, and then shut down the
SPAs using the shutdown command prior to running the ISSU process.
Supported MIBs
The following MIBs are supported in Cisco IOS XE Release 2.3 and later releases for the ATM SPAs on
the Cisco
ASR 1000 Series Routers.
• ATM-MIB
• CISCO-AAL5-MIB
• CISCO-ATM-EXT-MIB
• CISCO-CLASS-BASED-QOS-MIB
• CISCO-ENTITY-ALARM-MIB
• CISCO-ENTITY-EXT-MIB
• CISCO-ENTITY-FRU-CONTROL-MIB
• CISCO-ENTITY-ASSET-MIB
• CISCO-ENTITY-SENSOR-MIB
• CISCO-IETF-PW-MIB
• CISCO-IETF-PW-MPLS-MIB
• CISCO-IF-EXTENSION-MIB
• CISCO-MQC-MIB
• CISCO-PPPOE-MIB (beginning in Cisco IOS XE Release 2.5)
• CISCO-SONET-MIB
• ENTITY-MIB
• ENTITY-SENSOR-MIB
• IF-MIB
• MIB-II
• MPLS-CEM-MIB
• OLD-CISCO-CHASSIS-MIB
• SONET-MIB
For more information about MIB support on a Cisco ASR 1000 Series Routers, refer to the Cisco ASR
1000 Series Aggregation Services Routers MIB Specifications Guide, at the following URL:
http://www.cisco.com/en/US/docs/routers/asr1000/mib/guide/asr1kmib.html
To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use
Cisco
MIB Locator found at the following URL:
http://tools.cisco.com/ITDIT/MIBS/servlet/index