Cisco ASR 1000

10-32
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
Chapter 10 Configuring the Ethernet SPAs
Using show Commands to Check SFP Module and XFP Module Status
Incorrect QL values • Ensure that there is no framing mismatch
with the SSM option.
• Reproduce the issue using the debug
network-clock errors, debug
network-clock event, and debug platform
ssm commands. Also, enable the debug
hw-module subslot command.
Alarms • Reproduce the issue using the debug
platform network-clock command enabled
in the route processor. Alternatively, enable
the debug network-clock event and debug
network-clock errors commands.
Problem Solution