Cisco ASR 1000 Configuration Guide

Contents
xviii
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
Upgrading FPD Images in a Production System 26-2
Using a Non-Production System to Upgrade the Cisco ASR Series Router SPA FPD Image 26-3
Verifying System Compatibility First 26-3
Optional FPD Procedures 26-4
Manually Upgrading SPA FPD Images 26-4
Upgrading Multiple FPD Images 26-4
Displaying Current and Minimum Required FPD Image Versions 26-5
Displaying Information About the Default FPD Image Package 26-6
Verifying the FPD Image Upgrade Progress 26-7
FPD Image Upgrade Examples 26-7
Automatic FPD Image Upgrade Example 26-7
Manual FPD Image Upgrade Example 26-8
Troubleshooting Problems with FPD Image Upgrades 26-9
Power Failure or Removal of a SPA During an FPD Image Upgrade 26-9
Performing an FPD Recovery Upgrade 26-10
Verifying a Successful Upgrade 26-12
PART 8 Quality-of-Service (QoS)
CHAPTER 27 Classifying and Scheduling Packets for ASR 1000 Series 27-1
Release History 27-1
Overview of the Ingress Classification and Scheduling 27-2
Prerequisites for Ingress Classification and Scheduling 27-2
Classification and Scheduling Restrictions 27-3
Information About Ingress Classification 27-3
Ingress Classification Architecture 27-3
Resolving Oversubscription 27-5
Ingress Classification Overview 27-5
SPA-Based Classification 27-7
SIP-Based Classification 27-7
Default Classification 27-7
High Availability and Online Insertion and Removal 27-7
Configuring the Ingress Classification 27-7
Information About Ingress Scheduling 27-16
Scheduling Overview 27-17
Intra-CC Scheduling 27-17
Inter-CC Scheduling 27-17
Behavioral Changes in Scheduling 27-17

Cisco ASR 1000 Specifications

General

Operating System	Cisco IOS XE
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC
Number of Total Expansion Slots	Varies by model
Management Port	Console
Redundant Power Supply Supported	Yes
Width	17.5 inches
Memory	Varies by model
Storage	Varies by model
Dimensions (H x W x D)	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model
Redundancy	Redundant power supplies, fans, and route processors (depending on model)