Cisco ASR 1000 Configuration Guide

Contents
iv
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
SPA Interface Processors 2-1
Shared Port Adapters 2-2
SIP and SPA Compatibility 2-3
Modular Optics Compatibility 2-5
PART 1 SPA Interface Processor
CHAPTER 3 Overview of the SIP 3-1
Release History 3-1
Supported SIP Features 3-2
Cisco ASR1000-SIP10 Features 3-2
Cisco ASR1000-SIP40 Features 3-2
Cisco ASR1000-SIP10 High-Availability Features 3-3
Supported MIBS 3-3
Command Reference Information 3-3
CHAPTER 4 Configuring the SIP 4-1
Configuration Tasks 4-1
Identifying Slots and Subslots for the SIP and SPAs 4-1
Specifying the Slot Location for a SIP 4-1
Specifying the SIP Subslot Location for a SPA 4-2
Hardware Module Scheduling Commands 4-3
Ingress Scheduling 4-3
Resetting a SIP 4-5
CHAPTER 5 Troubleshooting the SIP 5-1
General Troubleshooting Information 5-1
Interpreting Console Error Messages 5-1
Using debug Commands 5-1
Using show Commands 5-2
Using the Cisco IOS Event Tracer to Troubleshoot Problems 5-2
Preparing for Online Insertion and Removal of the SIP and SPAs 5-2
Preparing for Online Removal of a SIP 5-3
Deactivating a SIP 5-3
Reactivating a SIP 5-3
Verifying Deactivation and Activation of a SIP 5-4
Preparing for Online Removal of a SPA 5-5
Deactivating a SPA 5-6

Cisco ASR 1000 Specifications

General

Operating System	Cisco IOS XE
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC
Number of Total Expansion Slots	Varies by model
Management Port	Console
Redundant Power Supply Supported	Yes
Width	17.5 inches
Memory	Varies by model
Storage	Varies by model
Dimensions (H x W x D)	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model
Redundancy	Redundant power supplies, fans, and route processors (depending on model)