Cisco ASR 1000 Configuration Guide

27-9
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
Chapter 27 Classifying and Scheduling Packets for ASR 1000 Series
Information About Ingress Classification
SUMMARY STEPS
1. enable
2. configure terminal
3. ingress-class-map index-id
4. map ip all queue strict-priority
5. map ip dscp-based
6. map ip dscp dscp-value queue 0
7. map ip precedence-based
8. map ip precedence precedence-value queue strict-priority
9. exit
10. interface {POS | Serial} interface-path-id
11. plim qos input class-map index-id

Cisco ASR 1000 Specifications

General

Operating System	Cisco IOS XE
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC
Number of Total Expansion Slots	Varies by model
Management Port	Console
Redundant Power Supply Supported	Yes
Width	17.5 inches
Memory	Varies by model
Storage	Varies by model
Dimensions (H x W x D)	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model
Redundancy	Redundant power supplies, fans, and route processors (depending on model)