Cisco ASR 1000 Configuration Guide

27-21
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
OL-14127-08
Chapter 27 Classifying and Scheduling Packets for ASR 1000 Series
Information About Ingress Scheduling
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode. Enter your password when
prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
hw-module slot 1 qos input link A bandwidth 512
Example:
Router(config)# hw-module slot 1 qos input link
A bandwidth 512
Assigns a guaranteed minimum bandwidth of 512 Kbps for
ESI link A.
Step 4
hw-module slot 1 qos input link A weight 50
Example:
Router(config)# hw-module slot 1 qos input
link A weight 50
Assigns excess weight of 50 to the ESI link A of the SIP.
Step 5
exit
Example:
Router(config-if)# exit
Exits from the configuration mode and goes back to the
privilege execution mode.
Step 6
show platform hardware slot f0 serdes qos
Example:
Router# show platform hardware slot f0 serdes
qos
Qos Settings on FP:
slot # Min BW (Kbps) Min BW Mode Slot Weight
RP0 99975 HILO 256
SIP0 11199981 HI 50
Displays the minimum guaranteed bandwidth and weight
configured for all the SIP slots.

Cisco ASR 1000 Specifications

General

Brand	Cisco
Model	ASR 1000
Category	Network Router
Language	English