Cisco Catalyst 2950 Command Reference

2-161
Catalyst 2950 and Catalyst 2955 Switch Command Reference
OL-10102-01
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
ip ssh
Related Commands Command Description
show ip ssh Displays if the SSH server is enabled and displays the version and configuration
information for the SSH server. For syntax information, select Cisco IOS Release 12.2
Configuration Guides and Command References > Cisco IOS Security Command
Reference, Release 12.2 > Other Security Features > Secure Shell Commands.
show ssh Displays the status of the SSH server. For syntax information, select Cisco IOS Release
12.2 Configuration Guides and Command References > Cisco IOS Security
Command Reference, Release 12.2 > Other Security Features > Secure Shell
Commands.

Cisco Catalyst 2950 Specifications

General

Forwarding Bandwidth	8.8 Gbps
Switching Capacity	13.6 Gbps
Forwarding Rate	6.6 Mpps
Weight	3.6 kg
RAM	16 MB
Flash Memory	8 MB
Operating Humidity	10% to 85% non-condensing
Uplink Ports	2 x 10/100/1000Base-T
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicators	system
Operating Temperature	0 to 45°C
Ports	24 x 10/100 Ethernet ports
MAC Address Table Size	8, 192 entries
Power Supply	Internal 100-240V AC, 50-60Hz