Cisco Catalyst 2950 Command Reference

2-61
Catalyst 2950 and Catalyst 2955 Switch Command Reference
OL-10102-01
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
cluster management-vlan
cluster management-vlan
Use the cluster management-vlan global configuration command on the command switch to change the
management VLAN for the entire cluster. Use the no form of this command to change the
management VLAN to VLAN 1.
cluster management-vlan n
no cluster management-vlan
Syntax Description
Defaults The default management VLAN is VLAN 1.
Command Modes Global configuration
Command History
Usage Guidelines Enter this command only on the command switch. This command changes the management VLAN of
the command switch and member switches. Member switches must have either a trunk connection or
connection to the new command-switch management VLAN to maintain communication with the
command switch.
This command is not written to the configuration file.
Examples This example shows how to change the management VLAN to VLAN 5 on the entire cluster:
Switch(config)# cluster management-vlan 5
You can verify your settings by entering the show interfaces vlan vlan-id privileged EXEC command.
Related Commands
n VLAN ID of the new management VLAN. The range is 1 to 4094.
Release Modification
12.0(5.2)WC(1) This command was introduced.
Command Description
show interfaces Displays the administrative and operational status of a switching
(nonrouting) port.

Cisco Catalyst 2950 Specifications

General

Forwarding Bandwidth	8.8 Gbps
Switching Capacity	13.6 Gbps
Forwarding Rate	6.6 Mpps
Weight	3.6 kg
RAM	16 MB
Flash Memory	8 MB
Operating Humidity	10% to 85% non-condensing
Uplink Ports	2 x 10/100/1000Base-T
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicators	system
Operating Temperature	0 to 45°C
Ports	24 x 10/100 Ethernet ports
MAC Address Table Size	8, 192 entries
Power Supply	Internal 100-240V AC, 50-60Hz