Cisco Catalyst 2950

2-399
Catalyst 2950 and Catalyst 2955 Switch Command Reference
0L-10102-01
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
show running-config vlan
show running-config vlan
Use the show running-config vlan privileged EXEC command to display all or a range of
VLAN-related configurations on the switch.
show running-config vlan [vlan-ids] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show running-config vlan command:
Switch# show running-config vlan 900-2005
Building configuration...
Current configuration:
!
vlan 107
!
vlan 120
!
vlan 925
!
vlan 1000
end
vlan-ids (Optional) Display configuration information for a single VLAN identified by
VLAN ID number or a range of VLANs separated by a hyphen. The range is 1 to
4094.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.1(9)EA1 This command was introduced.