Cisco Catalyst 2950

2-427
Catalyst 2950 and Catalyst 2955 Switch Command Reference
0L-10102-01
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
show wrr-queue bandwidth
show wrr-queue bandwidth
Use the show wrr-queue bandwidth user EXEC command to display the weighted round-robin (WRR)
bandwidth allocation for the four class of service (CoS) priority queues.
show wrr-queue bandwidth [ | {begin | exclude | include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show wrr-queue bandwidth command:
Switch> show wrr-queue bandwidth
WRR Queue : 1 2 3 4
Bandwidth : 10 20 30 40
Related Commands
| begin (Optional) Display begins with the line that matches the specified
expression.
| exclude (Optional) Display excludes lines that match the specified expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.0(5.2)WC(1) This command was introduced.
Command Description
show wrr-queue cos-map Displays the mapping of the CoS to the priority queues.
wrr-queue bandwidth Assigns WRR weights to the four CoS priority queues.
wrr-queue cos-map Assigns CoS values to the CoS priority queues.