Cisco Catalyst 2950 Command Reference

2-547
Catalyst 2950 and Catalyst 2955 Switch Command Reference
OL-10102-01
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
vmps reconfirm (privileged EXEC)
vmps reconfirm (privileged EXEC)
Use the vmps reconfirm privileged EXEC command to immediately send VLAN Query Protocol (VQP)
queries to reconfirm all dynamic VLAN assignments with the VLAN Membership Policy Server
(VMPS).
vmps reconfirm
Syntax Description This command has no arguments or keywords.
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Examples This example shows how to send VQP queries to the VMPS:
Switch# vmps reconfirm
You can verify your settings by entering the show vmps privileged EXEC command and examining the
VMPS Action row of the Reconfirmation Status section. The show vmps command shows the result of
the last time the assignments were reconfirmed either as a result of the reconfirmation timer expired or
because the vmps reconfirm command was entered.
Related Commands
Release Modification
12.1(6)EA2 This command was introduced.
Command Description
show vmps Displays VQP and VMPS information.
vmps reconfirm (global
configuration)
Changes the reconfirmation interval for the VQP client.

Cisco Catalyst 2950 Specifications

General

Forwarding Bandwidth	8.8 Gbps
Switching Capacity	13.6 Gbps
Forwarding Rate	6.6 Mpps
Weight	3.6 kg
RAM	16 MB
Flash Memory	8 MB
Operating Humidity	10% to 85% non-condensing
Uplink Ports	2 x 10/100/1000Base-T
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicators	system
Operating Temperature	0 to 45°C
Ports	24 x 10/100 Ethernet ports
MAC Address Table Size	8, 192 entries
Power Supply	Internal 100-240V AC, 50-60Hz