Cisco Catalyst 2950 Command Reference

2-28
Catalyst 2950 and Catalyst 2955 Switch Command Reference
OL-10102-01
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
boot private-config-file
boot private-config-file
Use the boot private-config-file global configuration command to specify the filename that the software
uses to read and write a nonvolatile copy of the private configuration. Use the no form of this command
to return to the default setting.
boot private-config-file filename
no boot private-config-file
Syntax Description
Defaults The default configuration file is private-config.text.
Command Modes Global configuration
Command History
Usage Guidelines Only the software can read and write a copy of the private configuration file. You cannot read, write,
delete, or display a copy of this file.
Filenames are case sensitive.
Examples This example shows how to specify the name of the private configuration file as pconfig:
Switch(config)# boot private-config-file pconfig
Related Commands
filename The name of the private configuration file.
Release Modification
12.1(11)EA1 This command was introduced.
Command Description
show boot Displays the settings of the boot environment variables.

Cisco Catalyst 2950 Specifications

General

Forwarding Bandwidth	8.8 Gbps
Switching Capacity	13.6 Gbps
Forwarding Rate	6.6 Mpps
Weight	3.6 kg
RAM	16 MB
Flash Memory	8 MB
Operating Humidity	10% to 85% non-condensing
Uplink Ports	2 x 10/100/1000Base-T
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicators	system
Operating Temperature	0 to 45°C
Ports	24 x 10/100 Ethernet ports
MAC Address Table Size	8, 192 entries
Power Supply	Internal 100-240V AC, 50-60Hz