Cisco Catalyst 2950

2-49
Catalyst 2950 and Catalyst 2955 Switch Command Reference
OL-10102-01
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
clear pagp
clear pagp
Use the clear pagp privileged EXEC command to clear Port Aggregation Protocol (PAgP)
channel-group information.
clear pagp {channel-group-number [counters] | counters}
Syntax Description
Defaults This command has no default setting.
Command Modes Privileged EXEC
Command History
Examples This example shows how to clear channel-group information for a specific group:
Switch# clear pagp 4
This example shows how to clear channel-group traffic counters:
Switch# clear pagp counters
You can verify that the information was deleted by entering the show pagp privileged EXEC command.
Related Commands
channel-group-number Channel group number. The range is 1 to 6.
counters Clear traffic counters.
Release Modification
12.1(6)EA2 This command was introduced.
Command Description
show pagp Displays PAgP channel-group information.