2-402
Catalyst 2950 and Catalyst 2955 Switch Command Reference
0L-10102-01
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
show spanning-tree
show spanning-tree
Use the show spanning-tree user EXEC command to display spanning-tree state information.
show spanning-tree [active [detail] | backbonefast | blockedports | bridge | detail [active] |
inconsistentports | interface interface-id | mst | pathcost method | root | summary [totals] |
uplinkfast | vlan vlan-id] [ | {begin | exclude | include} expression]
show spanning-tree vlan vlan-id [active [detail] | blockedports | bridge | detail [active] |
inconsistentports | interface interface-id | root | summary] [ | {begin | exclude | include}
expression
show spanning-tree {vlan vlan-id} bridge [address | detail | forward-time | hello-time
| id |
max-age | priority [system-id] | protocol] [ | {begin | exclude | include} expression]
show spanning-tree {vlan vlan-id} root [address | cost | detail | forward-time | hello-time | id |
max-age | port | priority [system-id] [ | {begin | exclude | include} expression]
show spanning-tree interface interface-id [active [detail] | cost | detail [active] | inconsistency |
portfast | priority | rootcost | state] [ | {begin | exclude | include} expression]
show spanning-tree mst [configuration | instance-id] [detail | interface interface-id [
detail]]
[ | {begin | exclude | include} expression]
Syntax Description active [detail] (Optional) Display spanning-tree information only on active interfaces
(only available in privileged EXEC mode).
backbonefast (Optional) Display spanning-tree BackboneFast status.
blockedports (Optional) Display blocked port information (only available in privileged
EXEC mode).
bridge [address | detail |
forward-time | hello-time |
id | max-age | priority
[system-id] | protocol]
(Optional) Display status and configuration of this switch (optional
keywords only available in privileged EXEC mode).
detail [active] (Optional) Display a detailed summary of interface information (active
keyword only available in privileged EXEC mode).
inconsistentports (Optional) Display inconsistent port information (only available in
privileged EXEC mode).
interface interface-id
[active [detail] | cost |
detail [active] |
inconsistency | portfast |
priority | rootcost | state]
(Optional) Display spanning-tree information for the specified interface
(all options except portfast and state only available in privileged EXEC
mode). Enter each interface separated by a space. Ranges are not
supported. Valid interfaces include physical ports, VLANs, and port
channels. The VLAN range is 1 to 4094. The port-channel range is 1 to 6.
To Next Page
Loading...
Need help?
General
