Cisco Catalyst 2950

2-400
Catalyst 2950 and Catalyst 2955 Switch Command Reference
0L-10102-01
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
show running-config vlan
Related Commands Command Description
show running-config Displays the running configuration on the switch. For syntax information,
select Cisco IOS Configuration Fundamentals Command Reference for
Release 12.1 > Cisco IOS File Management Commands > Configuration File
Commands.
vlan (global
configuration)
Enters config-vlan mode for creating and editing VLANs. When VLAN
Trunking Protocol (VTP) mode is transparent, you can use this mode to
create extended-range VLANs (VLAN IDs greater than 1005).
vlan database Enters VLAN configuration mode for creating and editing normal-range
VLANs.