Cisco Catalyst 2950

2-280
Catalyst 2950 and Catalyst 2955 Switch Command Reference
0L-10102-01
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
show cluster
This is an example of output when this command is entered on a member switch:
Switch# show cluster
Member switch for cluster "commander"
Member number: 3
Management IP address: 192.192.192.192
Command switch mac address: 0000.0c07.ac14
Heartbeat interval: 8
Heartbeat hold-time: 80
This is an example of output when this command is entered on a member switch that is configured as the
standby command switch:
Switch# show cluster
Member switch for cluster "commander"
Member number: 3 (Standby command switch)
Management IP address: 192.192.192.192
Command switch mac address: 0000.0c07.ac14
Heartbeat interval: 8
Heartbeat hold-time: 80
This is an example of output when this command is entered on the command switch that has lost
connectivity from member 1:
Switch# show cluster
Command switch for cluster "Switch1"
Total number of members: 7
Status: 1 members are unreachable
Time since last status change: 0 days, 0 hours, 5 minutes
Redundancy: Disabled
Heartbeat interval: 8
Heartbeat hold-time: 80
Extended discovery hop count: 3
This is an example of output when this command is entered on a member switch that has lost connectivity
with the command switch:
Switch# show cluster
Member switch for cluster "commander"
Member number: <UNKNOWN>
Management IP address: 192.192.192.192
Command switch mac address: 0000.0c07.ac14
Heartbeat interval: 8
Heartbeat hold-time: 80