Cisco Catalyst 2950

2-311
Catalyst 2950 and Catalyst 2955 Switch Command Reference
0L-10102-01
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
show controllers lre profile
This is an example of output from the show controllers lre profile names command on the
Catalyst 2950ST-8 LRE and 2950ST-24 LRE switches:
Switch# show controllers lre profile names
Profile Name Type Downstream Upstream
Rate(Mbps) Rate(Mbps)
------------ ----------------- ---------- ----------
LRE-15 System-Configured 16.667 18.750
LRE-10 System-Configured 12.500 12.500
LRE-5 System-Configured 6.250 6.250
LRE-998-15-4 System-Configured 16.667 4.688
LRE-997-10-4 System-Configured 12.500 4.688
LRE-15LL System-Configured 16.667 18.750
LRE-10LL System-Configured 12.500 12.500
LRE-5LL System-Configured 6.250 6.250
LRE-10-5 System-Configured 12.500 6.250
LRE-10-3 System-Configured 12.500 3.125
LRE-10-1 System-Configured 12.500 1.563
LRE-8 System-Configured 9.375 9.375
LRE-7 System-Configured 8.333 8.333
LRE-15-5 System-Configured 16.667 6.250
LRE-15-3 System-Configured 16.667 3.125
LRE-15-1 System-Configured 16.667 1.563
LRE-4 System-Configured 4.167 4.167
LRE-3 System-Configured 3.125 3.125
LRE-2 System-Configured 2.083 2.083
LRE-4-1LL System-Configured 4.167 1.563
This is an example of output from the show controllers lre profile names command on the
Catalyst 2950ST-24 LRE 997 switch:
Switch# show controllers lre profile names
Profile Name Type Downstream Upstream
Rate(Mbps) Rate(Mbps)
------------ ----------------- ---------- ----------
LRE-12-9 System-Configured 12.500 9.375
LRE-12-3 System-Configured 12.500 3.125
LRE-9 System-Configured 9.375 9.375
LRE-9-6 System-Configured 9.375 6.250
LRE-9-4 System-Configured 9.375 4.688
LRE-9-3 System-Configured 9.375 3.125
LRE-6 System-Configured 6.250 6.250
LRE-6-4 System-Configured 6.250 4.688
LRE-6-3 System-Configured 6.250 3.125
LRE-4 System-Configured 4.688 4.688
Related Commands Command Description
lre profile Assigns an LRE profile to all the LRE ports on the switch.