Cisco Catalyst 2950

2-360
Catalyst 2950 and Catalyst 2955 Switch Command Reference
0L-10102-01
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
show ip igmp snooping
Vlan 1: IGMP switch querier status
--------------------------------------------------------
elected querier is 1.1.1.1 on port Fa8/0/1
--------------------------------------------------------
admin state : Enabled
admin version : 2
source IP address : 10.1.1.65
query-interval (sec) : 60
max-response-time (sec) : 10
querier-timeout (sec) : 120
tcn query count : 2
tcn query interval (sec) : 10
operational state : Non-Querier
operational version : 2
tcn query pending count : 0
Related Commands Command Description
ip igmp snooping Enables and configures IGMP snooping on the switch or on a
VLAN.
show ip igmp snooping Displays IGMP snooping multicast router ports for the switch or
for the specified multicast VLAN.
show ip igmp snooping Displays IGMP snooping multicast information for the switch or
for the specified parameter.