Cisco Catalyst 2950

2-373
Catalyst 2950 and Catalyst 2955 Switch Command Reference
0L-10102-01
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
show mac address-table multicast
Examples This is an example of output from the show mac address-table multicast vlan 1 command:
Switch# show mac address-table multicast vlan 1
Vlan Mac Address Type Ports
---- ----------- ---- -----
1 0100.5e00.0128 IGMP Fa0/1
1 0100.5e01.1111 USER Fa0/3, Fa0/4, Fa0/5, Fa0/6
This is an example of output from the show mac address-table multicast count command:
Switch# show mac address-table multicast count
Multicast Mac Entries for all vlans: 10
This is an example of output from the show mac address-table multicast vlan 1 count command:
Switch# show mac address-table multicast vlan 1 count
Multicast Mac Entries for vlan 1: 2
This is an example of output from the show mac address-table multicast vlan 1 user command:
Switch# show mac address-table multicast vlan 1 user
vlan mac address type ports
-----+----------------+-------+---------------------
1 0100.5e02.0203 user Fa0/1,Fa0/2,Fa0/4
This is an example of output from the show mac address-table multicast vlan 1 igmp-snooping count
command:
Switch# show mac address-table multicast vlan 1 igmp-snooping count
Number of igmp-snooping programmed entries : 1