Cisco Catalyst 2950 Command Reference

2-423
Catalyst 2950 and Catalyst 2955 Switch Command Reference
0L-10102-01
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
show vtp
Table 2-33 show vtp counters Field Descriptions
Field Description
Summary advertisements
received
Number of summary advertisements received by this switch on its
trunk ports. Summary advertisements contain the management
domain name, the configuration revision number, the update
timestamp and identity, the authentication checksum, and the
number of subset advertisements to follow.
Subset advertisements received Number of subset advertisements received by this switch on its
trunk ports. Subset advertisements contain all the information for
one or more VLANs.
Request advertisements received Number of advertisement requests received by this switch on its
trunk ports. Advertisement requests normally request information
on all VLANs. They can also request information on a subset of
VLANs.
Summary advertisements
transmitted
Number of summary advertisements sent by this switch on its trunk
ports. Summary advertisements contain the management domain
name, the configuration revision number, the update timestamp and
identity, the authentication checksum, and the number of subset
advertisements to follow.
Subset advertisements
transmitted
Number of subset advertisements sent by this switch on its trunk
ports. Subset advertisements contain all the information for one or
more VLANs.
Request advertisements
transmitted
Number of advertisement requests sent by this switch on its trunk
ports. Advertisement requests normally request information on all
VLANs. They can also request information on a subset of VLANs.
Number of configuration
revision errors
Number of revision errors.
Whenever you define a new VLAN, delete an existing one, suspend
or resume an existing VLAN, or modify the parameters on an
existing VLAN, the configuration revision number of the switch
increments.
Revision errors increment whenever the switch receives an
advertisement whose revision number matches the revision number
of the switch, but the MD5 digest values do not match. This error
means that the VTP password in the two switches is different or that
the switches have different configurations.
These errors means that the switch is filtering incoming
advertisements, which causes the VTP database to become
unsynchronized across the network.

Cisco Catalyst 2950 Specifications

General

Forwarding Bandwidth	8.8 Gbps
Switching Capacity	13.6 Gbps
Forwarding Rate	6.6 Mpps
Weight	3.6 kg
RAM	16 MB
Flash Memory	8 MB
Operating Humidity	10% to 85% non-condensing
Uplink Ports	2 x 10/100/1000Base-T
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicators	system
Operating Temperature	0 to 45°C
Ports	24 x 10/100 Ethernet ports
MAC Address Table Size	8, 192 entries
Power Supply	Internal 100-240V AC, 50-60Hz