Cisco Catalyst 2950

2-476
Catalyst 2950 and Catalyst 2955 Switch Command Reference
0L-10102-01
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
spanning-tree portfast (interface configuration)
Examples This example shows how to enable the Port Fast feature on an interface:
Switch(config)# interface fastethernet0/2
Switch(config-if)# spanning-tree portfast
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command Description
show running-config Displays the current operating configuration. For syntax
information, select Cisco IOS Configuration Fundamentals
Command Reference for Release 12.1 > Cisco IOS File
Management Commands > Configuration File Commands.
spanning-tree bpdufilter Prevents a port from sending or receiving bridge protocol data units
(BPDUs).
spanning-tree bpduguard Puts a port in the error-disabled state when it receives a BPDU.
spanning-tree portfast (global
configuration)
Globally enables the BPDU filtering or the BPDU guard feature on
Port Fast-enabled ports or enables the Port Fast feature on all
nontrunking ports.