Cisco Catalyst 2950

C-3
Catalyst 2950 and Catalyst 2955 Switch Command Reference
OL-10102-01
Appendix C Catalyst 2950 and 2955 Switch Debug Commands
debug auto qos
Related Commands Command Description
auto qos voip Configure auto-QoS for voice over IP (VoIP) within a QoS domain.
show auto qos Displays the configuration applied and the new defaults in effect when
auto-QoS is enabled.
show debugging Displays information about the types of debugging that are enabled. For syntax
information, select Cisco IOS Configuration Fundamentals Command
Reference for IOS Release 12.1 > Cisco IOS System Management
Commands > Troubleshooting Commands.