Cisco Catalyst 3560-X User Manual

Index
IN-7
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
CLI
abbreviating commands
1-3
command modes 1-1
configuration logging 1-4
described 1-6
editing features
enabling and disabling
1-6
keystroke editing 1-7
wrapped lines 1-8
error messages 1-4
filtering command output 1-9
getting help 1-3
history
changing the buffer size
1-5
described 1-5
disabling 1-6
recalling commands 1-6
managing clusters 1-16
no and default forms of commands 1-4
Client Information Signalling Protocol
See CISP
client mode, VTP
1-3
client processes, tracking 1-1
CLNS
See ISO CLNS
clock
See system clock
clusters, switch
accessing
1-13
automatic discovery 1-5
automatic recovery 1-10
benefits 1-2
compatibility 1-4
described 1-1
LRE profile considerations 1-16
managing
through CLI
1-16
through SNMP 1-17
planning 1-4
planning considerations
automatic discovery
1-5
automatic recovery 1-10
CLI 1-16
host names 1-13
IP addresses 1-13
LRE profiles 1-16
passwords 1-14
RADIUS 1-16
SNMP 1-14, 1-17
switch stacks 1-14
TACACS+ 1-16
See also candidate switch, command switch, cluster
standby group, member switch, and standby command
switch
cluster standby group
and HSRP group
1-12
automatic recovery 1-12
considerations 1-11
defined 1-2
requirements 1-3
virtual IP address 1-11
See also HSRP
CNS
Configuration Engine
configID, deviceID, hostname
1-3
configuration service 1-2
described 1-1
event service 1-3
embedded agents
described
1-5
enabling automated configuration 1-6
enabling configuration agent 1-9
enabling event agent 1-8
management functions 1-6
CoA Request Commands 1-23
Coarse Wave Division Multiplexer
See CWDM SFPs
command-line interface

Cisco Catalyst 3560-X Specifications

General

Enclosure Type	Rack-mountable - 1U
Subtype	Gigabit Ethernet
Ports	48 x 10/100/1000 + 4 x SFP
Flash Memory	64 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Operating System	Cisco IOS
Device Type	Switch
Performance	Switching capacity: 128 Gbps
Jumbo Frame Support	Yes
Routing Protocol	RIP-1, RIP-2, EIGRP
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTP, HTTPS
Features	DHCP support, VLAN support, QoS, IPv6 support, Syslog
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.3at
Stacking	Stackable
Security Features	SSH, RADIUS, TACACS+
Management	CLI
Dimensions (H x W x D)	17.5 in
Operating Temperature	32 to 113 °F (0 to 45 °C)
Humidity	10 - 95% (non-condensing)