Cisco Catalyst 3560-X User Manual

Index
IN-8
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
See CLI
command modes
1-1
commands
abbreviating
1-3
no and default 1-4
commands, setting privilege levels 1-8
command switch
accessing
1-11
active (AC) 1-10
configuration conflicts 1-12
defined 1-2
passive (PC) 1-10
password privilege levels 1-17
priority 1-10
recovery
from command-switch failure
1-10, 1-9
from lost member connectivity 1-12
redundant 1-10
replacing
with another switch
1-11
with cluster member 1-9
requirements 1-3
standby (SC) 1-10
See also candidate switch, cluster standby group,
member switch, and standby command switch
Common Criteria
1-11
common session ID
see single session ID
1-35
community list, BGP 1-59
community ports 1-2
community strings
configuring
1-14, 1-8
for cluster switches 1-4
in clusters 1-14
overview 1-4
SNMP 1-14
community VLANs 1-2, 1-3
compatibility, feature 1-12
compatibility, software
See stacks, switch
configurable leave timer, IGMP
1-6
configuration, initial
defaults
1-20
Express Setup 1-2
configuration conflicts, recovering from lost member
connectivity
1-12
configuration examples, network 1-23
configuration files
archiving
1-21
clearing the startup configuration 1-20
creating and using, guidelines for 1-10
creating using a text editor 1-11
deleting a stored configuration 1-20
described 1-9
downloading
automatically
1-18
preparing 1-11, 1-14, 1-17
reasons for 1-9
using FTP 1-14
using RCP 1-18
using TFTP 1-12
invalid combinations when copying 1-6
limiting TFTP server access 1-17
obtaining with DHCP 1-9
password recovery disable considerations 1-5
replacing and rolling back, guidelines for 1-22
replacing a running configuration 1-20, 1-21
rolling back a running configuration 1-20, 1-22
specifying the filename 1-19
system contact and location information 1-16
types and location 1-10
uploading
preparing
1-11, 1-14, 1-17
reasons for 1-9
using FTP 1-16
using RCP 1-19
using TFTP 1-13
configuration guidelines

Cisco Catalyst 3560-X Specifications

General

Enclosure Type	Rack-mountable - 1U
Subtype	Gigabit Ethernet
Ports	48 x 10/100/1000 + 4 x SFP
Flash Memory	64 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Operating System	Cisco IOS
Device Type	Switch
Performance	Switching capacity: 128 Gbps
Jumbo Frame Support	Yes
Routing Protocol	RIP-1, RIP-2, EIGRP
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTP, HTTPS
Features	DHCP support, VLAN support, QoS, IPv6 support, Syslog
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.3at
Stacking	Stackable
Security Features	SSH, RADIUS, TACACS+
Management	CLI
Dimensions (H x W x D)	17.5 in
Operating Temperature	32 to 113 °F (0 to 45 °C)
Humidity	10 - 95% (non-condensing)