Cisco ONS 15454 - Page 511

4-23
Cisco ONS 15454 Troubleshooting Guide, R8.5
November 2009
Chapter 4 Error Messages
EID-3165 The ring ID provided is already in use. Ring IDs must be
unique.
Refer to the error message text.
EID-3166 An error occurred while refreshing the {0} table. CTC encountered an error while refreshing
the specified table.
EID-3167 The slot is already in use. Refer to the error message text.
EID-3168 An error occurred while provisioning. An error was encountered while attempting
the specified provisioning operation. Refer
to the details portion of the error dialog box
for more information.
EID-3169 An error occurred while adding the card. CTC encountered an error while adding the
card.
EID-3170 You cannot delete this card: {0}. Refer to the error message text.
EID-3171 An error occurred while creating the trap destination. CTC encountered an error creating the trap
destination.
EID-3172 No RMON thresholds were selected. Select an RMON threshold.
EID-3173 The contact ''{0}'' cannot exceed {1} characters. The specified contact exceeds the specified
character limit.
EID-3174 The description ''{0}'' cannot exceed {1} characters. The specified location exceeds the specified
character limit.
EID-3175 The operator identifier ''{0}'' cannot exceed {1} characters. The specified operator identifier exceeds
the specified character limit.
EID-3176 The operator specific information ''{0}'' cannot exceed {1}
characters.
The specified operator specific information
exceeds the specified character limit.
EID-3177 The node name cannot be empty. The specified name is empty.
EID-3178 The node name ''{0}'' cannot exceed {1} characters. The specified name exceeds the specified
character limit.
EID-3179 The protect card is in use. Refer to the error message text.
EID-3180 The 1+1 protection group does not exist. Create a 1+1 protection group.
EID-3181 The Y-cable protection group does not exist. Refer to the error message text.
EID-3182 The topology element is in use and cannot be deleted as
requested.
You cannot delete the topology element
which is in use.
EID-3183 An error occurred while deleting the protection group. CTC encountered an error while deleting
the protection group.
EID-3184 No {0} was selected. You must select an item before completing
this task.
EID-3185 This ring has an active protection switch operation and cannot
be deleted at this time.
Refer to the error message text.
EID-3186 The node is busy: {0} is {1} and cannot be deleted as requested. The request cannot be completed.
EID-3187 An error occurred while deleting the trap destination. CTC encountered an error deleting the trap
destination.
Table 4-1 Error Messages (continued)
Error Warning
ID Error Warning Message Description