4-30
Cisco ONS 15454 Troubleshooting Guide, R8.5
November 2009
Chapter 4 Error Messages
EID-3345 An error occurred while setting expected band. The expected band must be set.
EID-3346 An error occurred while retrieving defaults from the node: {0}. There was an error retrieving defaults from
the specified node.
EID-3347 The file {0} cannot be loaded. CTC cannot load the specified file.
EID-3348 Properties cannot be loaded from the node. Refer to the error message text.
EID-3349 NE update properties cannot be saved to a file. Check your file system for space constraint
or any other problem.
EID-3350 NE update properties cannot be loaded from the node. Refer to the error message text.
EID-3351 The file {0} does not exist. The specified file does not exist.
EID-3352 An error occurred while setting a value at {0}. There was an error while setting the value at
the specified location.
EID-3353 No such interface is available. The interface specified is not present in
CTC.
EID-3354 The specified endpoint is in use. Select another endpoint that is not in use.
EID-3355 The specified endpoint is incompatible. Refer to the error message text.
EID-3357 The connections could not be calculated. Refer to the error message text.
EID-3358 An optical link model does not exist for the specified interface. Create an optical linkmodel for the
interface, and proceed.
EID-3359 Optical parameters could not be set for the node. Refer to the error message text.
EID-3360 ANS cannot be performed.
Please check {0} parameter value.
Refer to the error message text.
EID-3361 The ring termination is in use.
An error occurred while deleting the ring termination.
You cannot delete a ring in use.
EID-3362 An error occurred while deleting the ring termination. There was an error while deleting ring
termination.
EID-3363 No ring terminations were selected. You must select a ring termination.
EID-3364 An error occurred while creating the ring ID. There was an error while creating the ring
ID.
EID-3365 The OSC termination is in use. Select another optical service channel
(OSC) which is not in use.
EID-3366 The OSC termination could not be deleted. There was an error deleting the OSC
termination.
EID-3370 No optical link was selected. You must select an optical link.
EID-3371 An error occurred while calculating the automatic optical link
list.
Refer to the error message text.
EID-3372 CTC attempted to access an OCHNC connection that has been
destroyed.
CTC destroyed an external attempt to
access an optical channel network
connection.
EID-3375 The expected span loss must be set. Refer to the error message text.
Table 4-1 Error Messages (continued)
Error Warning
ID Error Warning Message Description
To Next Page
Loading...
