13
Appendix. Meaning of the warning messages
WARNING MESSAGES DESCRIPTION
ACTION EXECUTED The requested action has been executed.
ACT. REQ. CODE The requested action requires a code to be entered.
ACT. LOCKED The user is not authorised to perform activation.
ACT. LOCKED L2 Level 2 user is not authorised to perform activation (contact your installer for authorisation).
ACT. LOCKED L3 Level 3 user is not authorised to perform activation (contact your installer for authorisation).
TOT ZONE LOCK Zones not ready for forced total activation.
P1 ZONE LOCK Zones not ready for forced P1 activation.
P2 ZONE LOCK Zones not ready for forced P2 activation.
USER UNKNOWN The code entered has not been recognised (invalid code).
INST.NOT AUTH. The installer is not authorised.
USER NOT AUTH. The user is not authorised.
NOT AUT.ACT. The user is not authorised to perform activations.
NOT AUT.DEACT: The user is not authorised to perform deactivations.
NOT AUT. ACT. The user is not authorised to perform individual activations.
NOT AUT. FORCE The user is not authorised to perform forced activations.
NOT AUT. DEV. The user is not authorised to perform activations on the device.
NOT AUT. AREAS The user is not authorised to perform operations on a certain area.
USER TIMER OFF The user is enabled for access; disabled by a timer.
KEY NOT VALID The key is not valid.
OUTPUT ABSENT The action has been requested for an absent exit.
ZONE ABSENT! The action has been requested for an absent zone.
CAN’T EXCLUDE The zone cannot be excluded.
CAN’T ISOLATE The zone cannot be isolated.
TECH PRGRMNG Technical programming in progress. Wait before performing any operations.
UPDATE ERROR Device update error.
ACT. AREAS ERROR Access not permitted; areas activated.
DEV LOCKED Device Locked.
To Next Page
Loading...
