System Mgmt.
Activations
Activations
Total Acts.
ACTIVATE
TOTAL?
Activations
Total deacts.
DEACTIVATE
TOTAL?
Activations
Acts. Scenarios
SET ↵ ↓
Scenario P1
16
Activations
All the considerations described in the previous paragraphs relating to activation apply, even if open zones,
faults or tampering events are detected.
Scroll through the menu using the arrows until you see:
Then press 'ENTER' to display the activation options: Total Activation, Deactivation, Scenarios, Single area
activation.
Total activation
Press 'ENTER' to carry out a total activation.
To confirm activation, press 'ENTER'.
Deactivation
Press 'ENTER' to carry out a deactivation.
To confirm deactivation, press 'ENTER'.
Press 'ENTER' to access the screen ACTIVATION/Scenario P1
From the following screen:
Activation scenarios
This option can be used to activate an activation scenario.
From the following screen:
At this point, use the Up and Down arrows to select the desired scenario (Scenario P1, Scenario P2,
Scenario P1+P2, Scenario 4/16 ) and press ENTER' to activate it.
Use the up and down arrows to scroll through the available activation options.
To Next Page
Loading...
