57
LED management
This option can be used to select the LED operating mode.
There are two operating modes:
• Courtesy: used to select LED colour and brightness when lit steadily.
• Alarm: the LEDs provide indications corresponding to system alarms.
Only one operating mode can be selected at a time; disable both modes to switch off the LEDs.
To disable the operating mode press the
button if already active, or enable it by pressing if not
already activated.
Press the 'courtesy' button to display the following screen, which can be used to select LED colour
and brightness.
1. Colour tone selection
2. Selected colour
3. Brightness control (increase)
4. Brightness control (decrease)
5. Brightness level indication
To Next Page
Loading...
