ACTIVATE OUTPUT
O. Control unit 1
OUTPUT ACTIV.
CONFIRMED
OUTPUT DEACT.
CONFIRMED
COMMAND
EXECUTED
System Mgmt.
Activate Output
System Mgmt.
Commands
18
Output activation
This option can be used to work on the system outputs.
This option can be used to carry out one of the following commands:
Press the arrows to select the output you wish to work on.
To activate the output press 'ENTER' or 'ON', you will see the confirmation:
Press 'ENTER' to access the output activation screen
To deactivate the output press 'OFF'.
Then press 'ENTER' and use the up and down arrows to scroll through the available activation options
described from page 19onward.
Commands
• Event 1 key
• Event 2 key
• Overtime
• Stop Alarms
• Reset Alarms
• Stop telephone calls
• Reset Control Unit (only visible to the installer from the keypad; restores the default settings on the control unit).
• Request assistance
• Authorise Installer
Press 'ENTER' to execute the desired command
If the command is successfully executed, the following screen is displayed:
Use the arrows to scroll through the user menu until you see:
Use the arrows to scroll through the user menu until you see:
To Next Page
Loading...
