Key acquired:
Key duplicated
Key 1
Enabling
Activat.Param.
YES
Key 1
Description
Text:
Key 1
Key 1
Delete
Delete
key?
29
if the key has already been acquired.
Enable
This option can be used to enable or disable a key.
Select the 'Enabling' option on the second line and press 'ENTER'.
At this point uses the navigation keys to select whether to permanently enable the key or not, then
confirm using 'ENTER'.
» Completion of the procedure is confirmed by the message 'PARAMETER CHANGED'.
Description
This option can be used to edit the key description.
Select the 'Description' option on the second line and press 'ENTER'.
The flashing cursor will appear on the second line. Next, use the number buttons (in text entry mode)
to customise the description of the keys and confirm using 'ENTER'.
» Completion of the procedure is confirmed by the message 'PARAMETER CHANGED'.
9. Successful execution of the operation will be confirmed by the message ‘PARAMETER CHANGED’,
if the key has been acquired correctly, or
Delete
This option can be used to delete a key.
Select the 'Delete' option on the second line and press 'ENTER'.
Press 'ENTER' to confirm.
» Successful completion of the operation is confirmed by the message 'PARAMETER CHANGED'.
To Next Page
Loading...
