Options
Codes Management
User 1
Enter
User 1
Enter
Code:
******
Code:
Unset
System Mgmt.
Options
25
Press ‘ENTER’ to access the Codes Management menu.
Press ‘ENTER’ to access the Options menu.
Codes management
Options
This option can be used to edit and delete user codes.
» At this point the list of user codes will be displayed (if the user is authorised to modify other user codes
it will be possible to select using
a dierent user name before proceeding)
Edit active user code
The first option displayed is 'Enter'
Press the right and left navigation keys to change the selected user, and the up and down arrow keys to
change the option applied to the user.
Press 'ENTER' to apply the option to the selected user.
The 'Enter' option (if the user is already activated) can be used to edit the 6-digit code, pressing
'ENTER' afterwards:
Use the number keys to enter the new code, press 'ENTER' to confirm or 'C' to cancel (or to delete a
digit entered by mistake).
Edit inactive user code
If the user is not active, press 'ENTER' for the enter option:
To activate the code, press the number keys to enter the new code and press 'ENTER' to confirm.
Use the arrow keys to scroll through the System Mgmt. menu to display:
» If the code has been edited successfully, the following will appear: PARAMETER CHANGED.
» The following message indicates that an invalid code has been entered: ENTER WRONG!
» If the code has been edited successfully, the following will appear: PARAMETER CHANGED.
» The following message indicates that an invalid code has been entered: ENTER WRONG!
To Next Page
Loading...
