Working with Removable Drives 6-19
Writer: Carey Gregg Saved by: Rebecca Wiggins Saved date: 02/04/98 4:11 PM
Part Number: 314932-001 File name: Ch06.doc
Inserting a Diskette Drive into the MultiBay
CAUTION:
To prevent damage to the computer and diskette drive
and loss of information, turn off the computer before inserting a
diskette drive into the MultiBay. Do not insert the diskette drive
while the computer is turned on, in Suspend, or in Hibernation.
Electrostatic discharge can damage electronic components. Before
touching the diskette drive, ensure that you are discharged of static
electricity by touching a grounded metal object.
1 Turn off the computer.
2 Position the diskette drive, label facing up, against the left side
of the MultiBay.
3 Slide the diskette drive into the MultiBay until it locks into
place.
To Next Page
Loading...
Need help?
General