Getting Started 1-9
Writer: Carey Gregg Saved by: Rebecca Wiggins Saved date: 02/06/98 2:06 PM
Part Number: 314932-001 File name: Ch01.doc
Setting Up the Software
When you begin software setup, online instructions guide you
through the setup process.
IMPORTANT:
After you begin software setup, you must complete
the entire process, which may require up to 20 minutes. Make sure
the computer is plugged in for this process to ensure that software
setup is uninterrupted.
CAUTION:
To prevent file corruption and ensure the correct
software drivers are installed:
■
Do not dock the computer in a docking station.
■
Do not turn off or unplug the computer or remove a drive
during software setup.
Operating the Computer During Setup
■
To move around the screen while making selections and
entering information:
❐
press the
Tab
key,
❐
press the cursor (arrow) keys, or
❐
use the pointing device built into the computer keyboard.
■
To save your selections, press the
Enter
key or press one of the
mouse buttons on the computer keyboard.
■
To restore the screen if it is cleared by the screen saver during
a period of keyboard and mouse inactivity, press the
Shift
key.
For more information about using the built-in pointing device and
mouse buttons, refer to Chapter 3, “Using the Keyboard and
Pointing Device.”
Choosing a Language
If you are prompted to select your language, choose carefully.
IMPORTANT:
The languages that you do
not
choose will be deleted
from the computer and cannot be recovered.
To Next Page
Loading...
Need help?
General