15-4 Computer Setup and Diagnostics Utilities
Writer: Carey Gregg Saved by: Rebecca Wiggins Saved date: 12/19/97 9:06 AM
Part Number: 314932-001 File name: Ch15.doc
Running Computer Checkup (TEST)
Computer Checkup (TEST) determines whether the various
computer components and devices are recognized by the computer
and are functioning properly. You can display, print, or save the
information generated by Computer Checkup.
To run Computer Checkup
1
Plug the computer into an external power source.
(A low battery condition could interrupt the program.)
2 Connect a printer if you want to print a log of error messages.
3 Turn on the external devices that you want to test.
4 Turn on or restart the computer.
5 Access Compaq Utilities by pressing
F10
when the blinking
cursor appears in the upper-right corner of the display.
6 Click Computer Checkup
Æ
View the Device List.
■
If the list of installed devices is correct, click OK.
■
If the list is incorrect, ensure that any new devices are
installed properly.
NOTE:
Compaq Utilities are intended for testing only Compaq-
supplied components. Testing of non-Compaq components may
be inconclusive. If there is a problem with a non-Compaq
component, contact your Compaq authorized dealer, reseller, or
service provider.
7
Select one of the following from the Test Option menu:
■
Quick Check Diagnostics
■
Automatic Diagnostics
■
Prompted Diagnostics
8
Follow the instructions on the screen as the devices are tested.
9
Click Exit Diagnostics
Æ
Exit from this utility.
To Next Page
Loading...
