Using Battery Packs 5-5
Writer: Carey Gregg Saved by: Rebecca Wiggins Saved date: 12/19/97 1:13 PM
Part Number: 314932-001 File name: Ch05.doc
Resolving a Low Battery Condition
Resolving a Low Battery Condition by Connecting to an
Electrical Outlet
To charge battery packs in the computer while connected to an
electrical outlet:
1 Connect the power cord to the power connector on the rear
panel of the computer.
2 Plug the power cord into an electrical outlet.
Up to two battery packs can be charged in the computer while the
computer is connected to an external power source. The battery
packs charge in the following order:
â–
Battery pack in the computer battery bay
â–
Battery pack in the computer MultiBay
To Next Page
Loading...
Need help?
General