EasyManua.ls Logo

Compaq Armada 7800 - Setting Modem Defaults

Compaq Armada 7800
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7-8 Using the Internal Modem
Writer: Carey Gregg Saved by: Rebecca Wiggins Saved date: 02/06/98 11:07 AM
Part Number: 314932-001 File name: Ch07.doc
Setting Modem Defaults
Some data and fax communications software prompts you for
specific information about the modem model you are using. Select
the Compaq Armada 7000 Series II Modem, or, if it is not
available as a choice, select one of the following modems:
Hayes Compatible
COM2
NOTE:
Choosing another modem will not affect the actual DCE
speed of the modem.
If your software requires specific modem settings, the following
information may be required when setting up the modem for
operation:
COM port setting
DCE Speed
DTE Speed
Data Format
Data Format
Data Format
Dial Command
AutoAnswer Command
Sound
Columns
Local Echo
COM2
33.6 Kbps
57.6 Kbps
Databits - 8
Parity - N
Stopbits - 1
ATDT
ATS0 = 1
Enabled
80
Enabled

Table of Contents

Related product manuals