16-18 Troubleshooting
Writer: Rebecca Wiggins Saved by: Rebecca Wiggins Saved date: 02/06/98 11:08 AM
Part Number: 314932-001 File name: Ch16.doc
Possible Cause
There is a baud rate conflict.
Solution
Select the same baud rate for both computers.
Possible Cause
There is a conflict with the # bits.
Solution
Select the same
“
# bits
”
setting for both computers.
Possible Cause
There is a stop bit conflict.
Solution
Select the same stop bit for both computers.
Possible Cause
There is a parity conflict.
Solution
Select the same parity setting for both computers.
Cannot transmit data
Possible Cause
Direct sunlight, fluorescent light, or flashing incandescent light is
close to the infrared connections.
Solution
Remove the interfering light source(s).